Tag Archives: Arts & Crafts

Celebrate the True Meaning of Christmas with Free Printable Nativity Cards & Easy Craft Tutorial for Hope & Joy Napkin Rings for Christmas Dinner

December 13, 2016 Leigh

Easily craft beautiful hope and joy napkin rings for Christmas dinner with this quick tutorial, and then send free printable nativity cards that celebrate the true meaning of Christmas. In this way you may offer the message of abounding hope and joy for the Christmas season.

In order to make the napkin rings, you will need a wired ribbon of 1.5 inch width. Choose any pattern of colors to coordinate with the table linens you plan on using. You will need to cut a 6 inch strip for each ring you plan to make, and then you can use the leftover ribbon for coordinating wreaths or packages. You’ll also need miniature word ornaments or scrapbooking embellishments. (This ribbon was 40% off at Hobby Lobby, as were the adornments which were available in various metals and words.) You can also go a step further by bending wire to form a cursive word… but on this day I was going for a quick and easy 5 minute project!

Place a line of glue along the decorative side of the short end of the ribbon. Slightly overlap that edge over the other, and press firmly for lasting adherence. (Use a silicone finger guard to protect yourself from the heat while pressing.)

Flatten the rings with the seam centered on the underside. Use a glue like E6000 to adhere the metal to the glittered ribbon, as it grips unlike surfaces well. Just use a dot of glue at the center of the word. Let them dry overnight.

My free printable card is a great way to send Christmas blessings celebrating the true meaning of the holiday to everyone on your list. Print out the exact number you need, when you need them, without having to go back to the store for extra boxed sets. It’s much simpler and far less expensive to buy bulk boxes of envelopes for year round use. (Check my arts & crafts webpage or index webpage for my ever-growing selection of free printables… free for noncommercial personal use only!) To print the cards, simply right click on the image above and select print. One page equals one 5×7 card… so choose the number you want to make, and select color and photo quality settings.

Cut along the colorized edge of the rectangle and fold in half. If you really want to make the card shine, spread opalescent glitter glue over the halos and stargazes, and then let them dry overnight before sending. (In person, the dramatic difference is worth the 10 seconds per card.) You can handwrite a line of scripture (like the one below), or use a dollar bin stamp as an easy way to add a special Christmas message of your choice to the inside of each card. (Le fidèLe Designs affiliate store Michaels offers these often.) This is a great project to involve the whole family with an assembly line of printing, cutting, folding, stamping, glittering, and then group signing. You spend less money, and the hand crafted card is appreciated more by the recipient (at least from what I’ve experienced.)

“Now the God of hope fill you with all joy and peace in believing, that ye may abound in hope, through the power of the Holy Ghost.” Romans 15:13 KJV

Faithfully Yours,

Leigh

P.S. See the napkin rings within a Christmas dinner setting in my article here: Celebrate the True Meaning of Christmas with Tablescape Décor Ideas Evoking Love’s Pure Light

Arts & Crafts, Parties & Tablescapes

Celebrate Halloween with Colorful Day of the Dead (Dia de los Muertos) Party Décor Inspired by Traditional Ofrenda Symbolism (+ DIY Craft Tutorials & Candy Recipe)

October 5, 2016 Leigh 4 Comments

Celebrate Halloween with colorful Dia de los Muertos (Day of the Dead) party décor inspired by traditional ofrenda symbolism. It is an edifying means of incorporating both traditions into an event that seeks to cultivate an atmosphere of cultural understanding. By recognizing the universal conditions of love, life, and death through festivity, we can be united as one people comprised of a beautiful mosaic of ethnic tradition. In this way, revelry becomes a means of dispelling the negative cultural bias that plagues the nation, so that we may move forward together in celebration.

Dia de los Muertos (Day of the Dead) coincides with All Saints Day and All Souls Day in both tradition and calendar. In this regard, a traditional ofrenda (offering) has a higher central tier honoring a deceased loved one. Taking the place of a photograph is another traditional element, that of a religious symbol. It takes the form of a chalkboard cross that has been inscribed with flowers and the Spanish words, “Te Amo” (“I love You”). A vase upcycled with crystal appliques holds a floral offering in keeping with gravesite ritual. See how easy this is to make in my tutorial here: DIY Calaveras de Azucar (Sugar Skulls) Napkin Rings, Wine Glass Charms, & Vase Craft Tutorial for Dia de los Muertos (Day of the Dead) Themed Halloween Dinner Party Décor.

Lit candles are said to illuminate the path for the visiting spirits of loved ones. Representing fire, these may be in the form of Catholic religious candles depicting santos (saints), luminarias (lanterns) made of pierced paper bags or cans, or plain wax candles. Perritos (little dog figurines) are presented in symbolic gesture regarding the idea that dogs guided ancestral spirits to the afterlife. (Because surely “all dogs go to Heaven”!) Mariposas monarcha (monarch butterflies), that migrate to Mexico through Texas in the fall, represent visiting ancestors. Wild yellow and orange Mexican marigolds (cempasúchil) are known as the flor de muerto (flower of the dead). They may be linked into garlands, shaped into crosses, or placed decoratively. A fun way to incorporate these elements is make your own luminarias and flowers. The traditional crafts are easy to make using my tutorial here: Easy DIY Upcycled Can Tea-light Luminarias (+ Free Printable Template) & Tissue Paper Flowers Crafts (for Cinco de Mayo Fiesta Décor). Another essential item is a papel picado (cut paper) banner which signifies the fragility of life.

Representing water is a Mexican bubble glass pitcher bearing a traditional mask of la calavera catrina (iconic image of a wealthy 1800’s era Euro-Mexican lady). When worn as a parade mask, half of the face is covered with a skull representation symbolizing life as inextricably linked with death. Make your own with the help of my tutorial here: DIY La Calavera Catrina Costume Mask & Calaveras de Azucar (Sugar Skulls) Banner for a Dia de los Muertos (Day of the Dead) Themed Halloween. Other decorative elements are multi-colored doilies beneath figures of X’s & O’s(kisses & hugs), and little signs naming the holiday. Small sugar skull tins replace toys, and framed sugar skull images replace ancestors’ photos in this lighthearted nod to tradition.

Calaveritas de azucar (little sugar skulls) are necessary offerings as its sweetness (representing life) is said to balance the bitterness of muerte (death). Easily make these with my recipe here: Calaveras de Azucar (Sugar Skulls) Edible Folk Art & Egg-Free Vegan Candy Recipe for Dia de los Muertos (Day of the Dead) or Halloween. Seeds (with an obvious connection to life) originally decorated skulls in place of sugar. They are still offered as a traditional component, with food representing the element earth. Here they are contained in floral dishes nested into decorative tin pails. Sprouted pepitas or semillas de Calabaza (pumpkin seeds), pipas (sunflower seeds), and fried green peas as well as roasted chick peas (garbanzo beans) are adorned here with glittered skull cupcake picks. A trio of palanqueta de ajonjoli disks (sesame seed candy) are another sweet form of seed offering. (Nut brittle is a form of this kind of candy.) Sugared marshmallow pops are propped into stacks of customary naranjas (oranges). (The pops were purchased at Fiesta Mart, but they may also be found at Le fidèLe affiliates Michaels & World Market whose coupon links are in the left side bar or below on a smart phone.) Pan de muerto (bread of the dead) sits front and center of the ofrenda as it denotes human life in its round skull-like form with an X of raised dough like cross-bones. It is a pan dulce (sweet bread) flavored with anise and orange peel. Candies, Mexican chocolate, and chicle (chewing gum) are also customary offerings.

White glittered skull shapes may be decorated and strung as another craft honoring the holiday. Read how to make the banner here: DIY La Calavera Catrina Costume Mask & Calaveras de Azucar (Sugar Skulls) Banner for a Dia de los Muertos (Day of the Dead) Themed Halloween.

Make your own stand-up signs with dollar wooden shapes from the craft store. These prepainted shapes came from Le fidèLe Design’s affiliate Michaels (see the coupon link in the left side bar or scroll down on a smart phone), but any blank shape may be decorated easily with paint pens. Simply glue a wooden bead or shape (like these pyramids) to the base of the back.

The background fabric for the ofrenda was once used as a tablecloth for a dinner party. (It can be purchased at Le fidèLe affiliate Joann whose coupon link is in the left sidebar, or below on a smart phone.) See it in this capacity in my previously posted article using this theme for a grown-up Halloween tablescape here: Dia de los Muertos (Day of the Dead) Themed Halloween Dinner Party Décor + DIY Décor & Recipe Links. Learn how to make your own wine glass charms and napkin rings for the dinner party here: DIY Calaveras de Azucar (Sugar Skulls) Napkin Rings, Wine Glass Charms, & Vase Craft Tutorial for Dia de los Muertos (Day of the Dead) Themed Halloween Dinner Party Décor.

Feliz Dia de los Muertos!

Faithfully Yours,

Leigh

Arts & Crafts

Faux Metal Stars Paper Mache Craft Tutorial & DIY Napkin Rings for Memorial Day, Veterans Day, or Independence Day

May 24, 2016 Leigh

Make your own faux metal stars inexpensively out of paper maché ornaments with this craft tutorial, and then easily DIY custom patriotic napkin rings for Memorial Day, Veterans Day, or Independence Day. Use these to perfectly coordinate with your existing holiday décor for a high end look on a shoestring budget. These hefty appearing textured “metal” stars are actually lightweight enough to be used in so many more applications. And they really do fool everyone… until they’re touched!

It’s astonishingly easy to turn inexpensive paper maché ornament stars (found in craft stores nearly year round) into expensive looking one-of-a-kind textured metallic pieces to embellish any project you can think of.

Grab a bag of star ornaments, some cheap white school glue, a lighter or match, and a candle. (I like to use up the last chunks of tall or broken candles to use on these kinds of projects, because candles flames do work better than lighter flames… just don’t ask me why. I stuck this pink leftover into an empty glass soda bottle to hold it in place… as is necessary to prevent wax drip burns.)

Cover a portion of a star completely in white glue. Hold it into the flame until the glue becomes hard with a dusty charcoal layer over it. (Don’t hold it over the bare paper because it will burn! If a flame does spark, just blow it out like a candle. Cover that area with more glue, and then burn on.)

Rub off the dirty charcoal layer with a clean rag or paper towel. (You’ll start seeing a smooth sheen appear.)

You can leave them as is or rub a light wash of metallic paint over them (cheap acrylic craft paint works well). It’s an easy way to add verdigris or to switch between silver and gold. I use a sponge square to dab on paint, and then quickly wipe some of it away (it does dry really fast).

You can really see the detail of the texture on the star’s undersides. (There’s no need to finish the base if you plan on gluing them onto something else.)

Now let’s make mix-and-match patriotic napkin rings using 1 roll of clearance chambray wired ribbon and some lengths of various American themed twill ribbon.

First, cut 6 inch lengths of ribbon (1 chambray and 1 twill for each ring). Then hot glue the twill across the center of the larger chambray. Next, glue one short end over the other, overlapping them slightly.

Check out the patriotic rings in action here: Reverential Memorial Day, Veterans Day, or Independence Day Tablescape Décor Ideas Honoring American Forces

Learn how to make a matching patriotic banner here: DIY July 4^th Denim No-Sew Applique Collage Star-Spangled Banner Craft Tutorial for Independence Day

Happy 4^th of July fire-working!

Faithfully Yours,

Leigh

Recipes

Decadent Macadamia Nut Cake (Gluten-Free Vegan Cheesecake & Pound Cake Fusion) + DIY Cake Decorating Stencil Tutorial

April 24, 2016 Leigh

This decadent macadamia nut cake is a unique fusion of rich cheesecake and dense pound cake, yet it’s gluten-free and vegan! I invented it on a random whim of culinary creativity with no idea of how delicious it would turn out. I found out that it tastes even better on the second-day… which makes it a fantastic make-ahead dessert for you next gathering of gal pals. Easily decorate it with a DIY stencil and confectioner’s sugar, and serve it with a variety of fruit preserves. Then all you need to do is wait for the compliments to roll in before shocking everyone with the news that it’s gluten-free and vegan. Who knew guilt-free could taste this indulgent?!

Ingredients:

2 cups raw macadamia nuts (or raw cashews… soaked overnight)

2 tablespoons coconut oil (or butter, shortening, etc.)

2 teaspoons pure vanilla extract (or other extract)

4 teaspoons lemon juice (or other citrus juice)

½ cup fresh water (or juice)

2 cups Arrowhead Mills gluten-free baking mix (or another baking mix… not just flour)

2 egg replacers (3 teaspoons dry replacer + 4 tablespoons warm water… or 2 whole eggs, or 2 chia or flax “eggs”)

1 ¼ cups confectioner’s sugar (or powdered sugar)

1 teaspoons guar gum (or xanthan gum)

1 teaspoon baking soda

1 dash sea salt (= ⅛ teaspoon)

Optional toppings: fruit preserves

Instructions:

Remember to soak the macadamia nuts at room temperature the night before you want to bake the cake.

Drain off the soaking liquid, and blend the nuts at high speed with a fresh ½ cup of water plus the lemon juice, vanilla extract, coconut oil, and prepared egg replacer. (Mix the dry egg replacer well with warm water until it’s a frothy white liquid.) Now add the dry ingredients to the wet concoction, mixing it very well. (For those of you with corn allergies… note that confectioner’s sugar and guar gum are the corn-free alternatives to powdered sugar and xanthan gum.)

Pour the batter into round metal cake tins. (Metal conducts heat better for gluten-free baked goods.) Bake for approximately 1 hour, or until golden brown, in a 350ᵒ oven. (My oven has been running low and slow… so vary the time according to your oven’s temperament.)

While letting the cakes cool completely, find a piece of clean copy paper to make a stencil / template with. Fold it in half, and draw one side of a heart (with the center of it running into the folded edge). Cut this out, and unfold it to reveal a perfect heart.

Lay down the open heart and sprinkle additional confectioner’s sugar over the opening.

Remove the stencil and sprinkle more around the edges of the cake.

Another option is to lay down the solid heart template and sprinkle confectioner’s sugar around it.

This is a great way to easily decorate this kind of cake for a gathering. Then you can top individual servings with everyone’s favorite flavor of fruit preserves.

Make your cake peachy keen by topping it with scrumptious peach preserves straight from Fredericksburg, Texas… the town is known for its perfect peaches! (You can buy these delicious preserves, along with other amazing products from the Hill Country, at the affiliate link in the sidebar for Fredericksburg Farms.)

Faithfully Yours,

Leigh

P.S. A little birdie told me that a smidgen is ¹̷32 teaspoon, a pinch is ¹̷16 teaspoon, and a dash is ⅛ teaspoon… who knew a pinch of salt could be so technical!

Arts & Crafts

DIY Scrapbooking Paper Flower Mobile Craft Tutorial for Decorations & Gifts (Birthdays, Baby Showers, Mother’s Day, & Get Well Wishes)

April 24, 2016 Leigh

Craft your own DIY mobile from scrapbooking paper flowers with this tutorial for making decorations and gifts for birthdays, baby showers, Mother’s Day, and get well wishes. They’re great to hang up as party decorations, and then let your guests take them home as gifts. They also inexpensively make sweet craft room décor, and because they’re so lightweight they can be placed nearly everywhere… even suspended over a small workspace in a tiny craft closet to bring the magic of a lush fairy garden inside.

The most important elements of the mobile are the paper flowers that hang from it. Try walking through the scrapbooking aisle at your local craft store, and choose the collection that really catches your eye. (Here, I’m using K & Company layered accents that were on sale.) Be sure to buy 2 matching sets, so that you can glue them back to back later.

It looks much prettier to add a wash of color to the backs of the floral elements, so that when they’re glued they appear as additional petals. (The easiest way to do this is with a sheer colored marker like these Prismacolor markers in limepeel and lilac.) You can also easily modify the front of the designs by adding a wash of color to them. (In this way, I made blue flowers violet and white flowers lavender… who needs “Bibbidy Bobbidy Boo” when you have markers?!)

Also, find a package of smaller floral elements to further embellish your piece with. (Here, I’m using a package of flower confetti that I found on the clearance aisle last year.) Remember that it’s so easy to alter the colors of these elements by simply coloring over them with a marker. (This lilac Prismacolor marker added a translucent layer turning my baby blue confetti into lavender… Flora, Fauna, & Merriweather can eat their hearts out!)

You have several options for the ring the elements will hang from. You can use a 6 inch metal ring (like this golden one from Joann) and wrap it with ribbon… or simply use it as is. You can also opt to use a coordinating wired paper ribbon (as the one I’m using here, which came from my gift wrapping supplies). To do this simply cut a length of ribbon long enough to form approximately half a foot diameter (exact measurements aren’t necessary), and then cut that in half lengthwise.

Next, you’ll need to cut 1 strand of yarn/ribbon for each floral element. Try cutting them in various lengths from 6 to 10 inches. (I used clearance yarns that matched my paper flowers.)

Hot glue the yarn/ribbon pieces (staggered in lengths) to the inside curve of the wired ribbon piece.

Now glue the ends together to form a complete circle, and then glue the top flap (of the wired ribbon) down over the glued strands.

Next, you need to add 3 additional pieces of yarn/ribbon to make a hanging “tripod”. You can either glue them as you did with the strands earlier, or you can simply tie some on. Then, gather the loose ends at the top, and form a knotted loop to hang them by. (If you like, tie more pieces of yarn onto the loop to decorate it a bit.)

Now it’s time to glue on the big flowers. (It’s easiest to do this by hanging the mobile up, so that you can see how you’re arranging the elements.) Hot glue them back to back with the yarn/ribbon sandwiched in between them. (Even though they have foam stickers, it’s best to use a little glue so that the yarn/ribbon stays put… because every fairy godmother knows it mortifying when your creation falls apart.)

Hot glue the smaller floral pieces (confetti) in a staggered formation along the yarn/ribbon strands. (I also used torn off petals from the green floral confetti as leaves.) To the ring, add a few of the smaller flowers and a couple of larger elements (like these butterflies that were the K & Co. package… which I also tinkered with by adding color).

I wanted the dominantly purple mobile to have more of a purple toned ring, so I used a lilac Prismacolor to color in the white portions of the paper ribbon. (I did the same using a blue marker on the dominantly blue mobile… the blue fairy herself couldn’t do this any easier.) It’s the little touches like that which really make mobile a visually cohesive structure… in other words, it’s prettier that way.

If you feel like it needs more sparkle, attach crystals as flower centers and sprinkle glitter… then tell Tinkerbell to eat your pixie dust!

Faithfully Yours,

Leigh

P.S. Check out these mobiles HERE in my Fairyland Tablescape hanging from the trees in the background.

Then get my free printable fairy cards HERE to gift with the mobiles you just created.

Arts & Crafts

Free Printable Fairyland Mother’s Day & Birthday Cards + Super Easy DIY Ribbon Napkin Rings Craft Tutorials

April 24, 2016 Leigh 1 Comment

Craft a fantastic fairyland tablescape with this tutorial for super easy DIY ribbon napkin rings, and make fairyland cards for birthdays and Mother’s Day with my free printables. With four examples of napkin rings, using watercolor ribbon and paper gift wrapping ribbon… you’re sure to get all the inspiration you need to easily and inexpensively create the same magic for your own party. There you can raise a toast, as the fairies do in the cards, saying “Hip Hip Hooray” on celebration day!

Make the napkin rings using absolutely any kind of ribbon you like to coordinate with your linens and decorations. (Here, I’ve used different varieties of Offray brand watercolor ribbon to resemble the petals in my fairyland tablescape.)

Simply cut 6 inch lengths of it, and hot glue the edges (overlapping the short ends).

Here is another example of the watercolor ribbon turned into rings.

I made these pink and green rings to coordinate with my grandmother’s vintage ribbon rosettes.

Here, the same super easy technique is used with simple gift wrapping paper ribbon.

These would be equally lovely when paired with either fabric or paper napkins.

This is the same wired paper ribbon that I used to make the rings for my scrapbooking paper flower mobiles (click here for the craft tutorial).

Make these Mother’s Day or Birthday cards using my free printables (for personal use only). They only need to be printed, cut out, and folded over. (Find square envelopes in many colors to send these in at Paper Source, whose affiliate link is in the sidebar.)

Right click on one of the small images above and select print. (The left is Mother’s Day & the right is Birthday.) Print these on heavy cardstock paper using the photo setting.

To further embellish the cards as I’ve done here, you can brush on opalescent glitter glue over the fairy wings. A small ribbon bow hot glued above the words really adds dimension to the cards.

The flower fairies seen here are from the Mark Roberts collection. They really add a whimsical touch to the centerpiece in my fairyland tablescape (see it all put together by clicking here).

Hip Hip Hooray… we’re crafting today!

Faithfully Yours,

Leigh

Arts & Crafts

Easy DIY Taffeta Fabric Napkin Rings & No Sew Tablecloth Craft Tutorial & Free Printable Easter Egg Card or Invitation

March 6, 2016 Leigh

Easily craft these DIY napkin rings and no sew tablecloth from taffeta fabric, and make elegant Easter egg cards or invitations with my free printable in this tutorial. They’re an easy way to create a one-of-a-kind celebration for your next Easter family gathering.

To make the tablecloth, begin by folding one corner of the fabric over onto itself in a triangle shape. Cut the fabric along the edge of the folded section. When it is unopened it will make a perfect square. Slightly fold over the outside edges, and hot fabric glue them into a hem. (Iron the folds before gluing to achieve a perfect no sew hem.) Lay this cloth over another coordinating tablecloth for a lovely layered look. (Check out my Capiz Easter Egg Tablescape for more of these projects in action.)

To make the matching napkin rings, cut strips of fabric 2 inches wide by 6 inches long. Fold over the edges on the long sides, and hot fabric glue them under. Next, glue one short side over the other, slightly overlapping them. (Note that the underside of the taffeta is suitable to use also, for a more casual look.)

This is a great project to use up any leftover fabric from other DIYs, especially if you want to coordinate linens with your drapes or upholstery.

It’s also great to make these with end-of-bolt clearance sales, if you like the look of high end fabric yet have budget constraints. (And if you don’t… clearance shopping allows you to allocate more funds to charity. Double-win!)

Now print out Easter egg cards and invitations using my free printables. (Note that these are free only for your personal use and not for commercial purposes.) Simply right click on the image above and select print. Choose the photo setting, and print 1 full page for each card you desire. Print them on thick cardstock paper for the best quality card. Cut out the color image, and fold one end over the other. (Boxes of card sized envelopes are quite inexpensive, or you can make your own. Look for my tutorial on this in the future.)

Hoppy Easter to all you creative chicks!

Faithfully Yours,

Leigh

Arts & Crafts

Easy DIY Rainbow Napkin Rings Tutorial & Free Sky Printable Card / Invitation Craft for All Occasions Including Parties & St. Patrick’s Day

February 17, 2016 Leigh

This easy DIY rainbow napkin rings tutorial is perfect for many types of parties including St. Patrick’s Day, and my free printable all occasion sky card is a great craft for making matching invitations. The card can be made with or without the addition of a rainbow, and so it’s useful for many other purposes… such as sympathy, get-well, congratulations, good luck, missing you, birthday, et cetera. Is there ever really a bad time to send a rainbow as the symbolic harbinger of hope?!

Let’ make the rainbow napkin rings first. To begin, you’ll need a pale color base ribbon and a sheer rainbow ribbon for the top. I used a vintage soft pink satin for the base, because it really brought out the rainbow’s beauty. Just make sure both types of ribbon are the same width.

Cut 6 inch lengths of each type of ribbon for every ring you want to make. Next, hot glue the short ends only. Make sure to press the ribbon ends together firmly before the glue dries… using silicone finger protectors of course. Now glue one short end to the other, overlapping them slightly. Again, press them together firmly.

These rings are so quick and easy to make that they can be crafted at the last minute before a gathering. Who said procrastinator’s can’t have fabulous decorations?!

Let’s make the sky card now. You need to print one page for every card you wish to make. I like to make extras during each crafting session, in case I have an unexpected need for a last minute card. (Note that my free printable is for your personal use only… not for commercial purposes.) If you want to add a rainbow, you can use any variety of colorful ribbon you like… striped, thin, checked, thick, solid, translucent, plaid, paper, plastic, or gossamer fabric ribbon like this one that I found on clearance. You can even use a pretty washi paper tape if you like.

Simply right click on the small image above, and select print. Be sure to choose the photo setting for the finest image. It’s best to use a thick cardstock to make a nice card.

Cut out the rectangle with the logo and sky image together, and then cut out the cloud image. If you want to add a rainbow, cut a 5 inch length of ribbon on the diagonal (like this /__/ ).

Next, fold the rectangle in half to form the card. Add the rainbow by gluing the ribbon down to the top left corner, and then attach the other end. You can either glue the cloud on top of the ribbon directly, or use dimensional foam stickers to add height to the cloud. Try to place it under the sunrise just above the card opening.

The perfect St. Patrick’s Day greeting card contains a classic Irish blessing such as this one:

“May the Irish hills caress you. May her lakes and rivers bless you. May the luck of the Irish enfold you. May the blessings of Saint Patrick behold you.”

♣ Lá Fhéile Pádraig Sona Daoibh (Happy St. Patrick’s Day!)

Faithfully Yours,

Leigh

P.S. See more of the rainbow napkin rings in action here: Meet me at the End of the Rainbow Tablescape Ideas for St. Patrick’s Day Party Décor!

Arts & Crafts

Easy DIY Valentine’s Day Countdown Calendar / Treat Bag Banner & Love Letter Napkin Rings Craft Tutorials

January 26, 2016 Leigh

This easy DIY Valentine’s Day countdown calendar plus treat bag banner and love letter napkin rings craft tutorial comprises three of my favorite things to make… banners, napkin rings, and advent calendars. The latter project arose from the questions, “Why are countdown calendars typically made for Christmas advent and not for other holidays?” and, “Why not expand the celebration with 2 weeks of excitement leading up to Valentine’s Day?” This works well for either children or adults depending on what’s placed inside the bags. As for the love letter themed napkin rings, they perfectly fit a romantic Valentine’s theme… though this one is for adults only!

Let’s begin with the napkin rings. You’ll need a roll of Offray Brand Ribbon in a script pattern. (I purchased this ½ price with a coupon from Joann Craft & Fabric Stores. There’s a link for them in the sidebar.)

You can make 12 rings and still have enough left over for a gift package bow if you like. You’ll also need either hot glue or liquid fabric glue and fabric paint in red (because it works on so much more than just T-shirts).

Measure and cut a 6 inch length of ribbon for each ring you wish to make (use sharp sewing scissors to prevent fraying ends). If using hot glue, bond the ends with one side overlapping the other and press them together tightly. For liquid fabric glue, use a plastic clothes pin as a clamp or secure with a straight pin… and allow them to dry completely.

Next, make a faux sealing wax impression with the red paint. Either use the fabric paint tip to draw a circle and fill it in, or just squeeze some onto a plate and use a brush. Allow these to dry completely before handling. (Hot sauce bottles, glue bottles, and paint tubes placed inside the rings will prevent rolling and paint smears.)

These napkin rings were so quick and easy to craft, and they were a great little touch to add to the Love Letter Themed Tablescape (Perfect for Valentine’s Day, Romantic Date Night, or Anniversary Dinner).

Now let’s make a Valentine’s Day countdown calendar and treat bag banner. (This is an easy enough project for the kiddos in your life to make too.) Begin by purchasing 14 mini clothespins complete with chalkboard hearts (these were 12 for $1 at the Target bargain bins). You can also buy the clothespins plainly and easily attach small flat wooden hearts with wood glue or hot glue… yes, hot glue does work on wood. Then all you need to do is paint the hearts with chalkboard paint. (All of the major craft stores carry the hearts. There are sidebar links for my favorite stores that carry coupon codes with them!)

If you like, paint the remaining portion of the clothespins in your choice of red or pink… though the natural wood tone would look fine with the paper bags if you’re short on time. (I used dark scarlet multi-surface acrylic paint from DecoArt, because it matches my spice racks.) It’s easiest to clip them onto cardboard and just paint one side, leaving them to dry before flipping them over and completing the opposite side.

You have the option of writing the 14 day numbered countdown with actual chalk (so that they may utilized in another capacity after the holiday) or with a permanent chalk marker that can’t be rubbed off.

While those are drying, decorate your treat bags. (These plain little sacks were purchased cheaply for ½ off, but you can purchase printed ones if you’d like to speed up the process.) I used a red bingo marker to stamp dots in a polka dot pattern. (See more about this, along with other project ideas in my article on Fast & Easy DIY Hand-stamped Polka-dot Gift Wrap & Matching Gift Crafts.)Let these dry completely before the next step. (You also have the option of stamping a pattern onto the bags with ink or paint.)

Next, cut out hearts from black chalkboard paper, or use a paper punch in any shape you like, or speedily use readymade chalkboard sticker labels.

Here is my handy little template to print free at home then cut out to trace around. It’s an easy way to make the same exact heart shape repeatedly. (Just right click the small image above and select print.)

Adhere the paper hearts onto the bags with a permanent glue stick. Then run a strip of matching washi tape along the base for easily added flair.

String the dry clothespins onto ribbon, string, jute, cording, twine, or yarn. (I used yarn that looks like twine because three times the amount can be purchased for ⅓of the price.) Once again, use either permanent white marker or actual chalk to write on each heart.

I chose to write “Be my Valentine!” but “Valentines Day!” or “Happy Hearts Day” would also have fit on the 14 bags. You can also write the names of individual recipients like friends, classmates, or even alternate the names of family members.

Fill the little bags with anything you like… you can make it as inexpensive or extravagant as you like.

For kiddos: try candy, stickers, stamps, tiny toys, erasers, inexpensive jewelry… or silly printed jokes you won’t mind hearing over and over again. On the 14^th day, think about directions leading to a larger gift like a stuffed animal.

For adults: try printing faux fortunes, poems, romantic quotes, movie or event tickets, or even homemade coupons for “honey-do” chores or special treats. On the 14^th day, think about directions leading to a larger gift like a dozen roses, box of chocolates… or something uber masculine like the latest power tool at home depot.

This makes a super cute banner decoration as well, and it can be strung just about anywhere using either tape, 2 extra clothespins, or by tying knotted loops at each end of the string.

I ♥ Crafting… Don’t you?!

Faithfully Yours,

Leigh

Recipes

Calaveras de Azucar (Sugar Skulls) Edible Folk Art & Egg-Free Vegan Candy Recipe for Dia de los Muertos (Day of the Dead) or Halloween

October 17, 2015 Leigh

Calaveras de azucar (sugar skulls) are a folk art originating from southern Mexico for Dia de los Muertos (Day of the Dead). The sugar (azucar in Español) is said to balance the bitterness of death (muerte), and the small calaveras (skulls) are traditionally offered on All Saint’s Day (November 1) to beloved departed children (angelitos / inocentes) as one would leave flowers graveside. Because this recipe is an egg-free edible version that doesn’t use meringue powder or royal icing, it makes the perfect allergy-friendly, vegan, and low-calorie candy for a themed Halloween celebration!

Ingredients:

2 cups granulated white sugar
4 teaspoons water
Wilton ready-to-use icing multi-pack of 4 primary colors (not gel)
Wilton 3D skulls candy mold

Instructions:

Wash and dry the plastic mold. Measure a perfect cup of glistening white sugar (azucar in Español).

Use a small silicone spatula to mix 4 teaspoons of water (agua) into a bowl filled with the white sugar. (The key to sugar skull success is patient and thorough mixing to yield slightly damp sugar the consistency of sand.) Use the spatula to scoop globs of damp sugar into the mold, and also to pat it down compactly into each cavity. Smooth the top of each to flatten the sugar to sit evenly with the mold. (This helps later when combining the pieces to make 3D skull shapes.)

Place a cookie sheet on top of the mold. Flip them over while holding them together. The mold will now sit inverted on the cookie sheet. Carefully lift the plastic mold off to leave the sugar shapes on the sheet. (If some of them stick, gently flex two opposite corners of the mold in different directions. The remaining sugar shapes should pop out without breaking if you hover right over the sheet.) Make a second set of sugar shapes the same way. Let these dry at least 5 hours. (I left mine overnight, and decorated them the next day.) Another option is to bake these 5 to 10 minutes in a 200ᵒ oven. (Make sure to observe them closely in case your oven’s temperature is off.)

“Glue” a set of front and back skull (calavera) pieces together using Wilton ready to use icing. (This is an easy allergy-friendly egg-free alternative to a royal icing of meringue that hardens for the same traditional look, but note that they do contain corn. I found a 4 pack of primary colors in-store at Michaels that are the same size of a gel icing… but don’t use a gel because it doesn’t harden in the same way so that it may be handled when dry.) Press each shape together firmly and set aside.

You may leave these as Halloween skull candies or decorate them as a Mexican folk art. Add traditional decorative icing (glaseado) details like smile lines, hearts, flowers, swirls, dots, and marks that look like apostrophes. (The small icing tubes have a small tip built in that’s perfect adding small details to the skulls.) Let these sit overnight to harden thoroughly.

Wilton’s helpful hotline declared that the icing never really goes bad and may be used years later if capped tightly after use… good to know, but I doubt the small tubes will last long! Once dry, the sugar skulls (calaveras de azucar) may be handled without damaging them.

They may even be eaten as candy, which is wonderful considering most sugar skulls are inedible. (And so are the most popular recipes for them.) Since sugar is only 15 calories per teaspoon… I’m guessing that these are only about 35 calories each!

Set these sugar skulls out in a traditional Day of the Dead (Dia de los Muertos) offrenda, Halloween candy buffet, in the center of a October dinner table as edible decoration in lieu of after dinner mints!

Be sure to check out my article on Dia de los Muertos (Day of the Dead) Themed Halloween Dinner Party Décor and the 2 on DIY sugar skull crafts… costume mask, banner, vase, napkin rings, and wine glass charms!

Ahora, comer con gusto!

Faithfully Yours,

Leigh

Living Faithfully ~ Embracing Creativity